Dental Models Materials Surgical Guide Materials Temporary Crown Materials

Surgical Guide Materials

3D3 surgical guide material is formulated to create translucent, strong and stable appliance for guided implant surgery.


  • Higher drilling accuracy
  • Less room for error
  • Shortens surgery time


Product Overview

Features

  • High strength
  • High stability
  • Good transparency with clear view
  • Enables fast and accurate printing

Material Properties

Application

  • Shake well before pouring from the bottle into the 3D printer resin tank.
  • Before printing, determine printing parameter according to the printer used.
  • After printing completion, rinse the printed object with 95% isopropyl alcohol to remove excess resin on the surface. Recommended to use with ultrasonic bath for thorough cleaning (duration: 5 mins).
  • After cleaning, dry the printed object with air blower or paper towel, then proceed with post-curing of the object. Adjust the light curing intensity and duration according to the post-curing system being used.

Precautions

  • Keep the room well-ventilated
  • Wear all necessary PPE while handling the material, including goggles, nitril gloves and protective clothing
  • Gloves should be discarded and replaced immediately if there is any indication of degradation
  • Always clean the build platform and resin tray after use
  • Avoid recycling of used material as it may affect the next printing cycle
  • Avoid using the 3D3 Surgical guide material for other appliances
  • The product was developed and produced in compliance with the ISO 13485:2016 Standard.