Dental Models Materials
3D3 dental model material is a biocompatible material offering high-precision and high-accuracy models with a smooth surface finish. It can be used by laser, DLP and LCD based on 3D printers utilizing 405nm wavelength.
- Diagnostic models
- Implant models
- Orthodontic models
- Crown & bridge models
Product Overview
Features
- Heat resistant
- High stability
- High resolution
- Repeatability
Material Properties
Application
- Shake well before pouring from the bottle into the 3D printer resin tank.
- Before printing, determine printing parameter according to the printer being used.
- After printing, rinse the printed object with 95% isopropyl alcohol to remove excess resin on the surface.Ultrasonic bath is recommended for thorough cleaning (duration: 5mins).
- After cleaning, dry the printed object with air blower or paper towel, then proceed with post-curing of the object. Adjust the light curing intensity and duration according to the post-curing system being used.
Precautions
- Keep the room well-ventilated.
- Wear all necessary PPE while handling the material, including goggles, nitril gloves and protective clothing.
- Gloves should be discarded and replaced immediately if there is any indication of degradation.
- Always clean the build platform and resin tray after use.
- Avoid recycling of used material as it may affect the next printing cycle.
- Avoid using the 3D3 Dental model material for other appliances.
- The product was developed and produced in compliance with the ISO 13485:2016 Standard.